Tuning the Apache MaxClients parameter

One thing that can have a really drastic effect on a large site using Apache, is the value assigned to the MaxClients parameter.

This parameter defines how many simultaneous request can be served. Any connection request from browsers that come in after that will be queued.

Apache prefork, StartServers, MaxSpareServers and MinSpareServers

In the most common case, you will be using Apache in the prefork mode, meaning one process per connection, with a pool of processes pre-forked to standby for connections. The number of spare processes is defined by the values MaxSpareServers, MinSpareServers, while the number to start is defined by StartServers.

Maxclients default

By default, the MaxClients parameter has a compiled in hard limit of 256. This can be changed by recompiling Apache however. Some distributions, or hosting companies raise this limit to a very high value, such as 512 or even 1024 in order to cope with large loads.

While this makes sense when the web server is serving static content (plain HTML, images, …etc.), it can be detrimental to a dynamic web application like Drupal. So often, we have clients calling because their web server has grind to a halt, and the reason would be a too high MaxClients value.

A web site’s nemesis: Excessive Thrashing

The reason is that if your web site experiences a traffic spike, or if there is a bottleneck in the database, incoming requests cause new processes to be forked at a rate higher than old processes can service the older connections. This causes a condition where the system keeps creating new processes that overflow the available memory and starts to use the swap space. This almost always causes thrashing, where the system is just swapping pages from physical memory to virtual memory (on disk), and vice versa, without doing any real work. You can detect if thrashing has occurred by using the vmstat command (see our page on tools for performance tunings and optimization for more info).

A simple calculation for MaxClients on a system that does only Drupal would be:

(Total Memory – Operating System Memory – MySQL memory) / Size Per Apache process.

If your hosting company configured your server with all sorts of bells and whistles (like mod_perl, mod_python, in addition to mod_php), then Apache can easily be 21 MB per process. If your server has 512MB, then you can fit some 20 Apache processes. If you tune Apache well, and remove all the unneeded modules, and install a PHP op-code cache/accelerator, then you can make each Apache process take as little as 12 MB. These figures depend on how many modules you have loaded, how big they are, so there is no hard and fast rule. Even if one has 1GB of memory, and leaves 250 MB for the system and MySQL, with an Apache process of 15MB, this means 50 Apache processes can fit in the remaining 750MB.

Remember that you need memory for the operating system, as well as for MySQL. The more you give the system and MySQL memory, the more caching of the file system they do for you and avoid hitting disk, so do not use the very last available memory for MaxClients.

Tuning the ServerLimit

On some systems, there is another parameter that  sets an upper limit if MySQL. So for example, if ServerLimit is set by default to 256, and you want to increase MaxClients to 300, you will not be able to do so, until you set ServerLimit to 300 as well. Normally, you would see a warning message from Apache when you restart it to tell you that this needs to be done.


If you cannot do a proper calculation, then it is safest to start with a conservative number, e.g. 60 to 150 on a 2GB system, and then increase it as you monitor the usage of the system over a few weeks. By all means, do not keep it at the 512 value that came with your server/distribution until you know how much load you can handle.

Resources and Links

Copy from 2bits.com/articles/tuning-the-apache-maxclients-parameter.html

By dbglory Posted in PHP

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s